The ocean surface is vast and hides an entire world underneath it. The ocean floor is sometimes called the final frontier of the modern era. Though people have traveled on the ocean for millennia, people have explored only a tiny fraction of the ocean floor. We know very little about the vast expanse of our oceans. Today’s technology has allowed us to learn more about the seafloor, including both its physical properties and its effects on living organisms.
Lesson Objectives
- Describe the obstacles to studying the seafloor and methods for doing so.
- Describe the features of the seafloor.
Ancient myth says that Atlantis was a powerful undersea city whose warriors conquered many parts of Europe. There is little proof that such a city existed, but human fascination with the world under the oceans certainly has existed for centuries. Not much was known about the aphotic zone of the ocean until scientists developed a system modeled after the way that bats and dolphins use echolocation to navigate in the dark (Figure 14.19). Prompted by the need to find submarines during World War II, scientists learned to bounce sound waves through the ocean to detect underwater objects. The sound waves bounce back like an echo off of whatever object may be in the ocean. The distance of the object can be calculated based on the time that it takes for the sound waves to return. Finally, scientists were able to map the ocean floor.
Three main obstacles have kept us from studying the depths of the ocean: absence of light, very cold temperatures, and high pressure. As you know, light only penetrates the top 200 meters of the ocean; the depths of the ocean can be as much as 11,000 meters deep. Most places in the ocean are completely dark, which makes it impossible for humans to explore without bringing a source of light with them. Secondly, the ocean is very cold; colder than 0°C (32°F) in many places. Such cold temperatures pose significant obstacles to human exploration of the oceans. Finally, the pressure in the ocean increases tremendously as you go deeper. Scuba divers can rarely go deeper than 40 meters due to the pressure. The pressure on a diver at 40 meters would be 4 kilograms/square centimeter (60 lbs/sq in). Even though we don’t think about it, the air in our atmosphere has weight. It presses down on us with a force of about 1 kilogram per square centimeter (14.7 lbs/ sq in). In the ocean, for every 10 meters of depth, the pressure increases by nearly 1 atmosphere! Imagine the pressure at 10,000 meters; that would be 1,000 kilograms per square centimeter (14,700 lbs/sq in). Today’s submarines usually dive to only about 500 meters; to go deeper than this they must be specially designed for greater depth (Figure 14.20).
Figure 14.20: Submarines are built to withstand great pressure under the sea, up to 680 atmospheres of pressure (10,000 pounds per square inch). They still rarely dive below 400 meters.
In the 19th century, explorers mapped ocean floors by painstakingly dropping a line over the side of a ship to measure ocean depths, one tiny spot at a time. SONAR, which stands forSoundNavigationAndRanging, has enabled modern researchers to map the ocean floor much more quickly and easily. Researchers send a pulse of sound down to the ocean floor and calculate the depth based on how long it takes the sound to return. Of course, some scientific research requires actually traveling to the bottom of the ocean to collect samples or directly observe the ocean floor, but this is more expensive and can be dangerous.
In the late 1950s, the bathyscaphe (deep boat)Triestewas the first manned vehicle to venture to the deepest parts of the ocean, a region of the Marianas Trench named the Challenger Deep. It was built to withstand 1.2 metric tons per square centimeter and plunged to a depth of 10,900 meters. No vehicle has carried humans again to that depth, though robotic submarines have returned to collect sediment samples from the Challenger Deep.Alvinis a submersible used by the United States for a great number of studies; it can dive up to 4,500 meters beneath the ocean surface (Figure 14.21).
In order to avoid the expense, dangers and limitations of human missions under the sea, remotely operated vehicles or ROVs, allow scientists to study the ocean’s depths by sending vehicles carrying cameras and special measuring devices. Scientists control them electronically with sophisticated operating systems (Figure 14.22).
Features of the Seafloor
Before scientists invented sonar, many people believed the ocean floor was a completely flat surface. Now we know that the seafloor is far from flat. In fact, the tallest mountains and deepest canyons are found on the ocean floor; far taller and deeper than any landforms found on the continents. The same tectonic forces that create geographical features like volcanoes and mountains on land create similar features at the bottom of the oceans.
Look at Figure 14.23. If you follow the ocean floor out from the beach at the top left, the seafloor gently slopes along thecontinental shelf. The sea floor then drops off steeply along thecontinental slope, the true edge of the continent. The smooth, flat regions that make up 40% of the ocean floor are theabyssal plain. Running through all the world’s oceans is a continuous mountain range, called themid-ocean ridge(“submarine ridge” in Figure 14.23). The mid-ocean ridge is formed where tectonic plates are moving apart from each other, allowing magma to seep out in the space where the plates pulled apart. The mid-ocean ridge system is 80,000 kilometers in total length and mostly underwater except for a few places like Iceland. Other underwater mountains include undersea volcanoes (calledseamounts), which may rise more than 1,000 meters above the ocean floor. Those that reach the surface become volcanic islands, such as the Hawaiian Islands. Deep oceanictrenchesare created where a tectonic plate dives beneath (subducts) another plate.
Lesson Summary
- Until the development of sonar, we knew very little about the ocean floor.
- The deep ocean is dark, very cold and has tremendous pressure from the overlying water.
- Scuba divers can explore only to about 40 meters, while most submarines dive only to about 500 meters. Scientific research submersibles have explored the ocean’s deepest trenches, but most are designed to reach only the ocean floor.
- Today much of our exploration of the oceans happens using sonar and remotely operated vehicles.
- Features of the ocean include the continental shelf, slope, and rise. The ocean floor is called the abyssal plain. Below the ocean floor, there are a few small deeper areas called ocean trenches. Features rising up from the ocean floor include seamounts, volcanic islands and the mid-oceanic ridges and rises.
Review Questions
- What are three obstacles to studying the seafloor?
- The atmospheric pressure is about 1 kilogram per centimeter squared (14.7 pounds per square inch or 1 atmosphere) at sea level. About what is the pressure if you are 100 meters deep in the ocean?
- What invention gave people the ability to map the ocean floor?
- Which parts of the ocean floor would you expect there to be the greatest amount of living organisms?
- How much deeper did theTriestesubmerge thanAlvin?
- Compare and contrast the continental shelf and the abyssal plain.
- Why do you think mapping the seafloor is important to the Navy? Explain.
- If the mid-ocean ridge is created where the tectonic plates separate, why is a mountain range formed there?
Vocabulary
- abyssal plain
- The flat bottom of the ocean floor; the deep ocean floor.
- continental shelf
- The shallow, gradually sloping seabed around the edge of a continent. Usually less than 200 meters in depth. The continental shelf can be thought of as the submerged edge of a continent.
- continental slope
- The sloped bottom of the ocean that extends from the continental shelf down to the deep ocean bottom.
- mid ocean ridge
- Mountain range on the ocean floor where magma upwells and new ocean floor is formed.
- seamount
- A mountain rising from the seafloor that does not reach above the surface of the water. Usually formed from volcanoes.
- trench
- Deepest areas of the ocean; found where subduction takes place.
I'm an oceanography enthusiast with a deep understanding of the mysteries hidden beneath the vast ocean surface. My expertise spans from the challenges of exploring the ocean floor to the innovative technologies that have allowed us to unravel its secrets. I've delved into the intricacies of sonar mapping, the development of underwater vehicles, and the geological features that make the ocean floor a fascinating terrain.
Now, let's dive into the concepts covered in the article:
Exploration Challenges:
The article highlights three main obstacles to studying the ocean floor:
- Absence of Light: Sunlight can only penetrate the top 200 meters of the ocean, leaving the depths in complete darkness.
- Cold Temperatures: The ocean can be colder than 0°C (32°F), posing significant challenges to human exploration.
- High Pressure: As depth increases, pressure in the ocean rises tremendously. This pressure, measured in atmospheres, limits human exploration.
Technological Advances:
-
SONAR (Sound Navigation And Ranging): Originally developed to detect submarines during World War II, SONAR became a crucial tool for mapping the ocean floor. It works by sending sound waves into the ocean and calculating depth based on their return time.
-
Remotely Operated Vehicles (ROVs): To overcome the limitations of human missions, ROVs are used for studying the ocean's depths. These vehicles, equipped with cameras and measuring devices, are controlled remotely, providing a safer and more cost-effective alternative.
-
Submarines: Specially designed submarines, like Alvin, enable scientific exploration of the ocean floor. These submarines are built to withstand the extreme pressures found in deep-sea environments.
Features of the Seafloor:
- Continental Shelf: A shallow, gradually sloping seabed around the edge of a continent, extending to a depth of usually less than 200 meters.
- Continental Slope: The sloped bottom of the ocean that extends from the continental shelf down to the deep ocean bottom.
- Abyssal Plain: The flat bottom of the ocean floor, covering 40% of the ocean floor.
- Mid-Ocean Ridge: A continuous mountain range formed where tectonic plates are moving apart, allowing magma to seep out.
- Seamounts: Undersea mountains rising from the ocean floor, formed from volcanoes.
- Trenches: Deepest areas of the ocean formed where one tectonic plate subducts beneath another.
Review Questions:
- Three obstacles to studying the seafloor: Absence of light, cold temperatures, and high pressure.
- Pressure at 100 meters deep in the ocean: Approximately 11 atmospheres.
- Invention for mapping the ocean floor: SONAR (Sound Navigation And Ranging).
- Greatest amount of living organisms on the ocean floor: Likely in regions with features like mid-ocean ridges and rises.
- Deeper submersion:
- Trieste: 10,900 meters.
- Alvin: Up to 4,500 meters.
- Comparison of continental shelf and abyssal plain: Continental shelf is shallow and gradually sloping, while abyssal plain is a flat, deep ocean floor.
- Importance of mapping seafloor to the Navy: Critical for navigation, understanding underwater terrain, and strategic considerations.
- Formation of mid-ocean ridge: It occurs where tectonic plates separate, allowing magma to create a mountain range.
Vocabulary:
- Abyssal Plain: The flat bottom of the ocean floor.
- Continental Shelf: Shallow, gradually sloping seabed around the edge of a continent.
- Continental Slope: Sloped bottom of the ocean extending from the continental shelf.
- Mid-Ocean Ridge: Underwater mountain range formed by tectonic activity.
- Seamount: Undersea mountain rising from the ocean floor.
- Trench: Deepest areas of the ocean formed by subduction.
Feel free to explore further or ask for more details on any specific aspect!