Purpose: Students will make a paper model illustrating the concept of sea-floor spreading and the development of symmetrical magnetic "stripes" on either side of a mid-ocean spreading center.

Suggested Student Grouping: Students work as individuals.

Framework Integration: Themes: Patterns of change: over time, new sea-floor is created by the upwelling of magma at mid-ocean spreading centers; old ocean floor is destroyed by subduction at deep sea trenches. Science skills and processes: Inferring from a model. Integrating with other disciplines: Physical science: dipole magnets and magnetic fields; convection. Oceanography: topography of the ocean floor. Life Science: animals found at hot-water vents on the ocean floor.

Related Activities: Submarine Mountains.

Before performing this activity, students should be familiar with:
1) types of boundaries between lithospheric plates;
2) features of the ocean floor;
3) the concept of sea-floor spreading; and
4) the nature of the Earth's magnetic field and the fact that it has reversed its polarity many times in the past.

The Earth's layers — The Earth is a layered planet consisting of crust, mantle and core (Fig. 1). The outer 100 km or so is a rigid layer called the lithosphere, which is made up of the crust and uppermost mantle. The lithosphere is broken into a number of large and small plates that move over the asthenosphere, a plastic layer in the upper mantle. Earthquakes and volcanoes are concentrated at the boundaries between lithospheric plates. It is thought that plate movement is caused by convection currents in the mantle (Fig. 2), although the exact mechanism is not known. Lithosphere plates are moving at rates of a few cm per year.


Types of plate boundaries — There are three types of boundaries between lithospheric plates (Fig. 3):
1) convergent boundary — plates converge, or come together. If a plate of oceanic lithosphere collides with thicker and less dense continental lithosphere, the denser oceanic plate will dive beneath the continent in a subduction zone (Fig. 2).
2) divergent boundary — two plates diverge, or move apart and new crust or lithosphere is formed.
3) transform fault boundary — plates slide past one another with no creation or destruction of lithosphere.

The Ocean Floor — A map of the ocean floor shows a variety of topographic features: flat plains, long mountain chains, and deep trenches. Mid-ocean ridges are part of chain of mountains some 84,000 km long. The Mid-Atlantic Ridge is the longest mountain chain on Earth. These ridges are spreading centers or divergent plate boundaries where the upwelling of magma from the mantle creates new ocean floor.

Deep-sea trenches are long, narrow basins which extend 8-11 km below sea level. Trenches develop adjacent to subduction zones, where oceanic lithosphere slides back into the mantle (Fig. 2).


Continental drift — The idea that continents move is an old one; Alfred Wegener, a German meteorologist, proposed the hypothesis of continental drift. in the early 1900's. Wegener used several lines of evidence to support his idea that the continents were once joined together in a supercontintent called Pangaea and have since moved away from one another: (1) the similarity in shape of the continents, as if they once fit together like the pieces of a jigsaw puzzle; (2) the presence of fossils such as Glossopteris, a fossil fern whose spores could not cross wide oceans, on the now widely-separated continents of Africa, Australia, and India; (3) the presence of glacial deposits on continents now found near the equator; and (4) the similarity of rock sequences on different continents.

Wegener's hypothesis of continental drift was not widely accepted because he had no mechanism to explain how the continents move. The idea was not revived until new technology made exploration of the ocean floor possible.


Sea-floor spreading — In the early 1960s, Princeton geologist Harry Hess proposed the hypothesis of sea-floor spreading, in which basaltic magma from the mantle rises to create new ocean floor at mid-ocean ridges. On each side of the ridge, sea floor moves from the ridge towards the deep-sea trenches, where it is subducted and recycled back into the mantle (Fig. 2). A test of the hypothesis of sea-floor spreading was provided by studies of the Earth's magnetism.

The Earth's Magnetic Field — The Earth's magnetic field is thought to arise from the movement of liquid iron in the outer core as the planet rotates. The field behaves as if a permanent magnet were located near the center of the Earth, inclined about 11 degrees from the geographic axis of rotation (Fig. 4). Note that magnetic north (as measured by a compass) differs from geographic north, which corresponds to the planet's axis of rotation.

Placing a bar magnet beneath a piece of paper with iron filings on it will create a pattern as the filings align themselves with the magnetic field generated by the magnet. The Earth's magnetic field is similar to that generated by a simple bar magnet. At present, the lines of force of the Earth's magnetic field are arranged as shown in Figure 4; the present orientation of the Earth's magnetic field is referred to as normal polarity. In the early 1960s, geophysicists discovered that the Earth's magnetic field periodically reverses; i.e. the north magnetic pole becomes the south pole and vice versa. Hence, the Earth has experienced periods of reversed polarity alternating with times (like now) of normal polarity. Although the magnetic field reverses at these times, the physical Earth does not move or change its direction of rotation.

Basaltic lavas contain iron-bearing minerals such as magnetite which act like compasses. That is, as these iron-rich minerals cool below their Curie point, they become magnetized in the direction of the surrounding magnetic field. Studies of ancient magnetism (paleomagnetism) recorded in rocks of different ages provide a record of when the Earth's magnetic field reversed its polarity.


During World War II, sensitive instruments called magnetometers were developed to help detect steel-hulled submarines. When research scientists used magnetometers to study the ocean floor, they discovered a surprising pattern. Measurements of magnetic variations showed that, in many areas, alternating bands of rocks recording normal and reversed polarity were arranged symmetrically about mid-ocean ridges (Fig. 5).

In 1963, F. Vine and D.H. Matthews reasoned that, as basaltic magma rises to form new ocean floor at a mid-ocean spreading center, it records the polarity of the magnetic field existing at the time magma crystallized. As spreading pulls the new oceanic crust apart, stripes of approximately the same size should be carried away from the ridge on each side (Fig. 5). Basaltic magma forming at mid-ocean ridges serves as a kind of "tape recorder", recording the Earth's magnetic field as it reverses through time. If this idea is correct, alternating stripes of normal and reversed polarity should be arranged symmetrically about mid-ocean spreading centers. The discovery of such magnetic stripes provided powerful evidence that sea-floor spreading occurs.

The age of the sea-floor also supports sea-floor spreading. If sea-floor spreading operates, the youngest oceanic crust should be found at the ridges and progressively older crust should be found in moving away from the ridges towards the continents. This is the case. The oldest known ocean floor is dated at about 200 million years, indicating that older ocean floor has been destroyed through subduction at deep-sea trenches.

It took exploration of the ocean floor to discover sea-floor spreading, the mechanism for the movement of continents that Alfred Wegener lacked. The hypothesis of continental drift gained renewed interest and, when combined with sea-floor spreading, led to the theory of plate tectonics. The history of thought about the movement of continents provides a wonderful example of how hypotheses such as continental drift and sea-floor spreading are thoroughly tested before a new theory emerges. For an overview of the history of plate tectonics, see Tarbuck and Lutgens (1994).


MATERIALS (Sources given below)
— Maps of the ocean floor
— "This Dynamic Planet" map
For each student:
— 2 sheets of 8.5 x 11" binder paper (file folder cardboard could be used in place of paper to make a sturdier model)
— scissors
— ruler
— transparent tape
— masking tap
— colored pencils or crayons Suggestion: Make your own model ahead of time to show students before they make their models.

Maps of the Arctic, Atlantic, Pacific, and Indian Ocean floors are available from the National Geographic Society, Educational Services, P.O. Box 98019, Washington, D.C., 20090-8019; phone 1-800-368-2728. Each map costs $10.90.

From Fisher-EMD: (1) Phosphorescent map of the ocean floor: measures 24" X 24" ($10.60); (2) wall size Mid-Atlantic ridge map ($27.40). Order from Fisher Scientific-EMD, 4901 W. Lemoyne Street, Chicago, IL 60651; phone 1-800-955-1177.

"This Dynamic Planet: World Map of Volcanoes, Earthquakes, and Plate Tectonics" — measures 150 x 100 cm; developed by the United States Geological Survey and the Smithsonian Institution. Order from USGS Map and Book Distribution, P.O. Box 25286, Federal Center, Bldg.. 810, Denver, CO 80225; phone 303-236-7477. The price is $3.00.

Follow the steps on the student activity sheets. Students can measure the placement of subduction zones and the mid-ocean ridge for their model as shown in Figure 1 in the student activity sheets, or you can give them the ready-made template provided. You may wish to copy the template onto file folder or similar cardboard for a sturdier model.

Modifications: For younger children, omit explanation of magnetic stripes and reversals of polarity. Use the model to show them the creation of new sea floor at spreading centers and the disappearance of old sea-floor at subduction zones. You may wish to cut the paper model pieces for the students ahead of time, or use a model you have made as a demonstration for the class.
Extensions: Hydrothermal vent systems, called black and white smokers, found at oceanic spreading centers are one of the most exciting discoveries made during the last fifteen years of marine exploration. These smokers are the sites of mineral deposits and unique ecosystems that exist in total darkness. Integrate a unit on sea-floor spreading and ocean floor topography with biology by having students research the unique creatures associated with hydrothermal vent communities. Some suggested references are given below.

NSTA/FEMA, 1988, Tremor Troop Earthquakes: National Science Teachers' Association, Washington, D.C.

Tarbuck, E. J. and Lutgens, F. K., 1994, Earth Science (7th ed.), Macmillan Publishing Company, p. 207-242.

General information:
Yulsman, T., 1993, Charting Earth's Final Frontier: Earth, vol. 2, no. 4 (July 1993), p. 36-41. Discusses mapping of volcanoes, faults, canyons, and lava flows on the ocean floor using a side-scan sonar device called GLORIA (Geologic Long-Range Inclined Asdic).

The General Interest Publication "Marine Geology: Research Beneath the Sea" from the United States Geological Survey provides an overview of the methods and equipment that marine geologists employ to study the ocean floor. The pamphlet describes studies of ocean floor topography, sediments and mineral resources. Order up to 50 free copies (use school letterhead) from theUnited States Geological Survey, Box 25286, Denver Federal Center, Bldg. 810, Denver CO 80225; phone (303)236-7476.

For Younger Children:
Cole, J., 1992, The Magic School Bus on the Ocean Floor: Scholastic, Inc., New York. The kids in Mrs. Frizzle's class take a field trip to the deep ocean floor to study animal and plant life, a hot-water vent, and a coral reef (for elementary school children).

About Deep Sea Hydrothermal Systems:
Ballard, R. D. and Grassle, J. F., 1979, Incredible World of the Deep-sea Rifts: National Geographic, v. 156, No. 5 (Nov. 1979), p. 680-705.

Lutz, R. A. and Hessler, R. R., 1983, Life Without Sunlight - Biological Communities of Deep-Sea Hydrothermal Vents: The Science Teacher, v. 50, No. 3 (March 1983), p. 22-29.

Tunnicliffe, V., 1992, Hydrothermal-Vent Communities of the Deep Sea: American Scientist, v. 80 (July-August, 1992), p. 336-349.

"Treasures of Neptune: Klondike on the Ocean Floor" ($149.00; 26 min). Looks at the relationship between plate tectonics and marine mineral deposits; shows how the ocean floor is being mapped and looks at recovery systems for marine resources including underwater scoops and shovels and giant "vacuum cleaners". Order from Films for the Humanities & Sciences, P.O. Box 2053; Princeton, N. J. 08543-2053; phone 1-800-257-5126. "The Last Frontier on Earth" ($79.00; 26 min.). shows how scientists are exploring the sea floor using Side Scan Sonar mapping and deep sea drilling. Order from: Brittanica Learning Materials, Customer Service, 310 South Michigan Avenue, Chicago, IL 60604-9839; phone 1-800-554-9862.

"Physical Oceanography" ($59.95; 19 min.). Describes methods of exploring the oceans; interaction of oceans with the biosphere, lithosphere, and atmosphere to create a unique environment; and the three main characteristics of oceans: their chemistry, topography, and movement of water. Order from Scott Resources, P.O. Box 2121K, Ft. Collins, CO, 80522; phone 1-800-289-9299.

"Undersea Exploration" ($16.00 for 22 slides). This set illustrates submarine research using deep water submersibles and remotely operated vehicles to study ocean floor rift systems. Includes photos of black smokers, tube worms, and equipment used by oceanographers. Order from the American Geophysical Union, Attn.: Orders, 2000 Florida Avenue, N.W., Washington, D.C. 20009; phone 1-800-966-2481.

Some Related Activities:
The Crustal Evolution Education (CEEP) module, "How Fast Is the Ocean Floor Moving?" was developed by the National Association of Geology Teachers. In this module students examine data from sediments on the ocean floor, determine whether the data support the theory of sea-floor spreading, and calculate the rate of spreading of the East Pacific Rise. Other CEEP modules related to the ocean floor include: "Lithospheric Plates and Ocean Basin Topography"; "Microfossils, Sediments, and Sea-Floor Spreading"; "Movement of the Pacific Ocean Floor"; "A Sea-Floor Mystery: Mapping Polarity Reversals"; and "Plotting the Shape of the Ocean Floor". Each of these modules is available as a class pack which includes a Teacher's Guide and 30 student investigation booklets and costs $23.50. Order from Ward's Natural Science Establishment, Inc., 5100 West Henrietta Road, P.O. Box 92912, Rochester, New York 14692-9012; phone 1-800-962-2260.

asthenosphere — a portion of the mantle which underlies the lithosphere. This zone consists of easily deformed rock and in some regions reaches a depth of 700 km.
continental drift — The first hypothesis proposing large horizontal motions of continents. This idea has been replaced by the theory of plate tectonics.
convergent plate boundary — a boundary between two lithospheric plates that move towards each other. Such boundaries are marked by subduction, earthquakes, volcanoes, and mountain-building.
Curie point — the temperature (about 580 degrees C) above which a rock loses its magnetism.
deep-sea trenches — long, narrow, and very deep (up to 11 km) basins oriented parallel to continents and associated with subduction of oceanic lithosphere.
divergent plate boundary — a boundary between two plates that move away from one another; new lithosphere is created between the spreading plates.
lithosphere — the rigid, outermost layer of the Earth; includes crust and uppermost mantle and is about 100 km thick.
mid-ocean ridge — a continuous mountain chain on the floor of all major ocean basins which marks the site where new ocean floor is created as two lithospheric plates move away from one another.
normal polarity — a magnetic field that has the same direction as the Earth's present one.
paleomagnetism — the permanent magnetization recorded in rocks that allows reconstruction of the Earth's ancient magnetic field.
Pangaea or Pangea — the proposed "supercontinent" that began to break apart 200 million years ago to form the present continents.
plate tectonics — the theory that proposes that the Earth's lithosphere is broken into plates that move over a plastic layer in the mantle. Plate interactions produce earthquakes, volcanoes, and mountains.
reversed polarity — a magnetic field with direction opposite to that of the Earth's present field.
transform plate boundary — a boundary between lithosphere plates that slide past one another.
sea-floor spreading — a hypothesis, proposed in the early 1960s, that new ocean floor is created where two plates move away from one another at mid-ocean ridges.
subduction zone — a long, narrow zone where one lithospheric plate descends beneath another.


INTRODUCTION: The creation of new sea-floor at mid-ocean spreading centers and its destruction in subduction zones is one of the many cycles that causes the Earth to experience constant change.

PURPOSE: The purpose of this activity is to make a simple model that shows the evolution of oceanic crust through sea-floor spreading and subduction.

— 2 sheets of 8.5" x 11" paper (cardboard may be substituted for 1 of the sheets)
— ruler
— colored pencils or crayons
— scissors
— transparent tape
— masking tape

PROCEDURES: If your teacher gives you a ready-made template for this activity, skip steps 1-4.
1) Place one sheet of binder paper so that the long side is towards you (Fig. 1).


2) Draw a vertical line in the middle of the paper with a height of 11.5 cm leaving 5 cm on either side of the line. This line represents a mid-ocean spreading center (See Figure 1).
3) Draw a second vertical line to the right of the center line so that it lies 3 cm from the right edge of the paper. This line represents a subduction zone.
4) Draw a third vertical line to the left of the center line so that it lies 3 cm from the left edge of the paper. This line represents another subduction zone. When you are finished, your piece of paper should look like the diagram in Figure 1.
Label the mid-ocean ridge and subduction zones.
5) With a pair of scissors, cut the vertical lines so there will be three slits on the paper all the same height and parallel to each other. To reinforce the slits you have made, place masking tape over each one and re-cut the slit though the tape.
6) On the second sheet of paper draw 11 bands each 2.54 cm (1 "wide) perpendicular to the long edge of the paper.
7) Choose one color to represent normal polarity and a second to represent reversed polarity. Color alternate bands to represent periods of normal and reversed polarity. Color the band on the far left as reversed polarity.
8) Cut the paper in half parallel to the long edge to get two strips of paper as shown in Figure 2. Mark the bands on each strip with arrows to indicate alternating periods of normal (up arrow) and reversed (down arrow) polarity.


9) Insert one end of each strip of paper through the spreading center line on your first piece of paper (see Figure 3).
10) Pull each strip of paper towards the slits nearest the margins of the paper (the subduction zones). Tape each strip to make a loop as shown in Figure 3.
11) Circulate the ribbons of paper (which represent oceanic crust) to simulate the movement of ocean floor from the mid-ocean spreading center to the subduction zone.
Start the movement of the ribbons with bands representing normal polarity.

1) The Earth is about 4.6 billion years old. Based on observations of your sea-floor spreading model, why do you think that the oldest ocean floor is only about 200 million years old?
2) On the real ocean floor, alternating stripes of normal and reversed polarity are not all of equal width. What does this tell you about the lengths of time represented by normal and reversed polarity?

I have extensive knowledge and expertise in the field of geology, particularly in the areas of plate tectonics, sea-floor spreading, and the Earth's magnetic field. My background includes a deep understanding of the geological processes that shape the Earth's surface and the evidence supporting these concepts.

Now, let's delve into the information provided in the article:

1. Plate Tectonics and Lithospheric Plates:

  • The Earth is composed of layers: crust, mantle, and core.
  • The lithosphere, consisting of the crust and upper mantle, is divided into plates.
  • Plate movement is associated with convection currents in the mantle.

2. Types of Plate Boundaries:

  • Convergent boundary: Plates move towards each other, leading to subduction.
  • Divergent boundary: Plates move apart, creating new crust.
  • Transform fault boundary: Plates slide past each other.

3. Ocean Floor Features:

  • Mid-ocean ridges: Chains of mountains formed at divergent plate boundaries.
  • Deep-sea trenches: Long basins associated with subduction zones.
  • The Mid-Atlantic Ridge is the longest mountain chain on Earth.

4. Continental Drift:

  • Alfred Wegener's hypothesis suggested continents were once part of a supercontinent called Pangaea.
  • Evidence included similar shapes, fossils, glacial deposits, and rock sequences.

5. Sea-Floor Spreading:

  • Proposed by Harry Hess in the 1960s.
  • Basaltic magma rises at mid-ocean ridges, creating new ocean floor.
  • Magnetic stripes on the ocean floor provide evidence for sea-floor spreading.

6. Earth's Magnetic Field:

  • Generated by the movement of liquid iron in the outer core.
  • The magnetic field periodically reverses, recorded in basaltic lavas.

7. Age of Sea-Floor:

  • Youngest oceanic crust found at mid-ocean ridges; older crust towards continents.
  • Oldest known ocean floor is around 200 million years old, supporting sea-floor spreading.

8. Integration with Other Disciplines:

  • Physical science: Dipole magnets and magnetic fields, convection.
  • Oceanography: Topography of the ocean floor.
  • Life Science: Animals found at hot-water vents on the ocean floor.

This information provides a comprehensive overview of the concepts related to sea-floor spreading and plate tectonics, demonstrating the interconnected nature of Earth's geological processes. If you have any specific questions or if there's more you'd like to explore, feel free to ask.

Top Articles
Latest Posts
Article information

Author: Prof. Nancy Dach

Last Updated:

Views: 6125

Rating: 4.7 / 5 (77 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Prof. Nancy Dach

Birthday: 1993-08-23

Address: 569 Waelchi Ports, South Blainebury, LA 11589

Phone: +9958996486049

Job: Sales Manager

Hobby: Web surfing, Scuba diving, Mountaineering, Writing, Sailing, Dance, Blacksmithing

Introduction: My name is Prof. Nancy Dach, I am a lively, joyous, courageous, lovely, tender, charming, open person who loves writing and wants to share my knowledge and understanding with you.